PRESSURE
CLEANER WITH
DiBO GREENBOILER
TECHNOLOGY
CLEANER WITH
DiBO GREENBOILER
TECHNOLOGY
Ultra-compact mobile hot water pressure washer trailer | DiBO JMB-S/S Skid
A compact hot water pressure washer trailer with attractive appearance and equipped inside with the latest and greenest technologies. With its own power source and independent operation, also for use in places where no electricity supply is available.
With the option of cleaning with cold or hot water at high pressure, this DiBO high pressure washer is suitable for a wide variety of cleaning work. A low center of gravity in the middle at the axle ensures optimum load distribution, that together with the weight of <750 kg results in a highly comfortable drive. No special driver’s license is required to pull this trailer.
Product specifications
- New operating panel with digital display and joystick:
- Everything visible at a glance. Easy to adjust with a handy joystick and to operate with gloves.
- Electronic setting of the temperature (exact & constant)
- Electronic control with pressure gauge, hour counter, maintenance information, error messages and device functions that facilitate maintenance.
- The digital display indicates continuously the status of the machine and alarm.
- Modern & aerodynamic design for less air resistance
- UV-resistant double-walled housing in rotation moulded polyethylene >>> sound insulated: ˂ 85 dB
- All functionality needed for the activities are brought together on the rear of the machine - everything within hand reach
- Trailer version is built on a galvanized trailer fitted with support and swivel wheel
- Ultra-compact and lightweight <750 kg (no special driver's license required)
- Stainless steel DiBO high pressure hose reel
Technical specifications
- High-tech heating system 70 kW GreenBoiler for a greater efficiency > 92% 18% fuel saving Low CO2 emission Low maintenance cost
- 70 kW GreenBoiler + 20 kW Intercooling = 90 kW heating capacity
- Industrial diesel engine with preheating of the water in the tank via heat exchanger. This saves up 15 % fuel for the burner
- Total fuel savings of 33% with the GreenBoiler (18%) and heat-exchanger (15%) combination
- Radial high pressure pump with 3 ceramic plungers and stainless steel valves
- Boiler with independent motor fitted and fuel valve with electronic ignition
- 12 V operating voltage for electronic control and for the burner
- Washable water filter
- Run dry protection on the water and fuel tank
- Automatical stop system after 30 minutes of inactivity
- Automatic pre-glowing
- 200 l built-in water tank (only for "T" "TG" and "S" version)
- Pressure reduction up to 10 bar with sealed gun
- Stepless pressure and flow regulation via speed engine governor (manually (standard) or electronically ("+" version))
- Digital control and reporting on display of :
- motor functions
- flame monitoring
- water level (*)
- fuel level (*)
- Automatic speed regulation, idling after 30s (*)
- Track & Trace system (*), including information on
- Working hours burner & machine
- Errors visible from a distance
- Location of the machine
- Location history
- Error messages history
- Note: (*) = only at "+"-version
PRODUCT CODES
DiBO JMB-S 200/18 S
PRODUCT CODE
1.128.355 - JMB-S 200/18 S
OPERATING PRESURE (bar)
200 bar
WATER THROUGHPUT (l/h)
1080 l/h
MAXIMUM WATER TEMP (°C)
30 - 100°C
BURNER BOILER RATING (kW)
70 kW (diesel)
MOTOR RATING (kW)
11.7 kW
FUEL TANK CAPACITY (L)
53L
FLOAT TANK CAPACITY (L)
200L
DIMENTIONS (mm)
1927 x 1198 x 1095mm
WEIGHT (kg)
630 kg
NOZZLE
055
DiBO JMB-S+ 200/18 S
PRODUCT CODE:
1.128.356 - JMB-S+ 200/18 S
OPERATING PRESURE (bar):
200 bar
WATER THROUGHPUT (l/h):
1080 l/h
MAXIMUM WATER TEMP (°C)
30 - 100°C
BURNER BOILER RETING (kW)
70 kW (diesel)
MOTOR RATING (kW)
11.7 kW
FUEL TANK CAPACITY (L)
53L
FLOAT TANK CAPACITY (L)
200L
DIMENTIONS (mm)
1927 x 1198 x 1095mm
WEIGHT (kg)
630 kg
NOZZLE
055
DiBO JMB-S 250/15 S
PRODUCT CODE
1.128.505 - JMB-S 250/15 S
OPERATING PRESURE (bar)
250 bar
WATER THROUGHPUT (l/h)
900 l/h
MAXIMUM WATER TEMP (°C)
30 - 100°C
BURNER BOILER RATING (kW)
70 kW (diesel)
MOTOR RATING (kW)
11.7 kW
FUEL TANK CAPACITY (L)
53L
FLOAT TANK CAPACITY (L)
200L
DIMENTIONS (mm)
1927 x 1198 x 1095mm
WEIGHT (kg)
630 kg
NOZZLE
090
DiBO JMB-S+ 200/15 S
PRODUCT CODE
1.128.506 - JMB-S+ 200/15 S
OPERATING PRESURE (bar)
250 bar
WATER THROUGHPUT (l/h)
900 l/h
MAXIMUM WATER TEMP (°C)
30 - 100°C
BURNER BOILER RATING (kW)
70 kW (diesel)
MOTOR RATING (kW)
11.7 kW
FUEL TANK CAPACITY (L)
53L
FLOAT TANK CAPACITY (L)
200L
DIMENTIONS (mm)
1927 x 1198 x 1095mm
WEIGHT (kg)
630 kg
NOZZLE
090