Call us on: 0116 286 9126
Welcome to Clean Green Pressure Washers

previous arrow
next arrow
Slider

Heavy Cleaning hot water pressure washer trailer | DiBO JMB-C+ WWC

The DiBO JMB-C+ WWC A universal High power hot water pressure washer trailer built on a double-axle trailer, similar to the JMB-C+ but with a built-in autonomous vacuum system, driven by an industrial diesel engine. For professional cleaning with simultaneous recuperation of the residual water.

This model is available as trailer version, but it is also possible to build this unit into a van. New and progressive are the Track & Trace system and the operating panel with digital display and joystick.


Product specifications

  • Trailer version: galvanized double-axle trailer fitted with swivel wheel and brake
  • Twin axle trailer (TG2); 2 rear doors, a single side-flap on both sides, a spare wheel.
  • Bracket for the vacuum hose
  • Manhole for the manual cleaning of the waste water tank
  • Reinforced vacuum hose (15m) with connector for the use of auxiliary tools
  • New operating panel with digital display and joystick:
    • Everything visible at a glance. Easy to adjust with a handy joystick and to operate with gloves.
    • Electronic setting of the temperature (exact & constant)
    • Electronic control with pressure gauge, hour counter, maintenance information, error messages and device functions that facilitate maintenance.
    • The digital display indicates continuously the status of the machine and alarm

Technical specifications

  • High-tech heating system:
    • 110 kW GreenBoiler for a greater efficiency > 92%
    • 18% fuel saving
    • Low CO2 emission
    • Low maintenance cost
  • Automatic speed control (with 30 s shut-down delay to idle speed)
  • Industrial water cooled 3- or 4-cylinder diesel engine for the drive of the high pressure pump and the vacuum system, easy to turn ON and OFF by electromagnetic coupling
  • Industrial vacuum pump according to three lobes principle
  • Radial high pressure pump with 3 ceramic plungers and stainless steel valves
  • Boiler with independent motor fitted and fuel valve with electronic ignition
  • 12 V operating voltage for the electronic control unit and burner boiler
  • Pressure relief up to 10 bar with sealed gun
  • Built-in stainless steel clean water tank (400 l or 500 l)
  • Built-in stainless steel waste water tank (400 l or 500 l)
  • Stainless steel fuel tank (104 l) which can be filled from the outside
  • Start/contact-/ stop; emergency stop
  • Boiler switch ON/OFF
  • Vacuum system ON/OFF
  • Motor control system with electronic control
  • With security: level indicator of the fuel and water tank on the display with alarm
  • Electronic continuously variable pressure and flow control using speed regulation
  • Automatic speed regulation, idling after 30s
  • Auto-stop system stops the engine after 30 min. without spraying activity
  • Track & Trace system, including information on
    • Working hours burner & machine
    • Errors visible from a distance
    • Location of the machine
    • Location history
    • Error messages history
  • Automatic pre-glowing
  • Digital control and reporting on display of :
    • Motor functions
    • Flame monitoring
    • Water level
    • Fuel level

PRODUCT CODES


DiBO JMB-C+ WWC 200/18 TG2

PRODUCT CODE

1.132.375 - JMB-C+ WWC 200/18 TG2

OPERATING PRESURE (bar)

200 bar

WATER THROUGHPUT (l/h)

180 - 1080 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

18,9 kW (diesel)

MOTOR RATING (kW)

110kW

FUEL TANK CAPACITY (L)

400L

FLOAT TANK CAPACITY (L)

400L

DIMENTIONS (mm)

3825 x 1765 x 2240mm

WEIGHT (kg)

1580kg

NOZZLE

55

DiBO JMB-C+ WWC 200/18 TG27

PRODUCT CODE:

1.132.380 - JMB-C+ WWC 200/18 TG27

OPERATING PRESURE (bar):

200 bar

WATER THROUGHPUT (l/h):

180 - 1080 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

18,9 kW (diesel)

MOTOR RATING (kW)

110 kW

FUEL TANK CAPACITY (L)

500L

FLOAT TANK CAPACITY (L)

500L

DIMENTIONS (mm)

3825 x 1850 x 2400mm

WEIGHT (kg)

1680kg

NOZZLE

55

DiBO JMB-C+ WWC 350/18 TG2

PRODUCT CODE

1.132.675 - JMB-C+ WWC 350/18 TG2

OPERATING PRESURE (bar)

350 bar

WATER THROUGHPUT (l/h)

180 - 1080 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

26,0 kW (diesel)

MOTOR RATING (kW)

110 kW

FUEL TANK CAPACITY (L)

400L

FLOAT TANK CAPACITY (L)

400L

DIMENTIONS (mm)

3825 x 1765 x 2240mm

WEIGHT (kg)

1600 kg

NOZZLE

40

DiBO JMB-C+ WWC 350/18 TG27

PRODUCT CODE

1.132.680 - JMB-C+ WWC 350/18 TG27

OPERATING PRESURE (bar)

350 bar

WATER THROUGHPUT (l/h)

180 - 1080 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

26,0 kW (diesel)

MOTOR RATING (kW)

110 kW

MOTOR RATING (kW)

500 kW

FUEL TANK CAPACITY (L)

500 kW

DIMENTIONS (mm)

3825 x 1765 x 2400mm

WEIGHT (kg)

1700 kg

NOZZLE

40


VIDEOS

CONTACT US

Get in touch

More information on this model or to book a demo.