Call us on: 0116 286 9126
Welcome to Clean Green Pressure Washers

JMB-S/S+
HOT WATER
HIGH PRESSURE
TRAILER
JMB-S
10 METRE
HIGH-PRESSURE
STEEL HOSE
JMB-S
10 METRE
HIGH-PRESSURE
STEEL HOSE
previous arrow
next arrow
Slider

Ultra-compact mobile hot water pressure washer trailer mounted | DiBO JMB-S/S+

The trailer mounted DiBO JMB-S hot water high pressure cleaner has an attractive appearance and is fully equipped with the latest green  technologies. The JMB-S/S+ has its own power source so can opperate indipendantly in places where there is no electricity supply is currenltly available.

With the option of cleaning with both hot or cold water this trailer mounted high pressure cleaner is suitable for a wide range of cleaning work. This trailer has a low center of gravity that ensures optimum load distribution. The weight of the trailer is <750 kg which results in a comfortable drive and you don’t need any special driver’s license is required to pull this trailer.


Product specifications

  • New operating panel with digital display and joystick:
    • Everything visible at a glance. Easy to adjust with a handy joystick and to operate with gloves.
    • Electronic setting of the temperature (exact & constant)
    • Electronic control with pressure gauge, hour counter, maintenance information, error messages and device functions that facilitate maintenance.
    • The digital display indicates continuously the status of the machine and alarm.
  • Modern & aerodynamic design for less air resistance
  • UV-resistant double-walled housing in rotation moulded polyethylene >>> sound insulated: ˂ 85 dB
  • All functionality needed for the activities are brought together on the rear of the machine - everything within hand reach
  • Trailer version is built on a galvanized trailer fitted with support and swivel wheel
  • Ultra-compact and lightweight <750 kg (no special driver's license required)
  • Stainless steel DiBO high pressure hose reel

Technical specifications

  • High-tech heating system 70 kW GreenBoiler for a greater efficiency > 92% 18% fuel saving Low CO2 emission Low maintenance cost
  • 70 kW GreenBoiler + 20 kW Intercooling = 90 kW heating capacity
  • Industrial diesel engine with preheating of the water in the tank via heat exchanger. This saves up 15 % fuel for the burner
  • Total fuel savings of 33% with the GreenBoiler (18%) and heat-exchanger (15%) combination
  • Radial high pressure pump with 3 ceramic plungers and stainless steel valves
  • Boiler with independent motor fitted and fuel valve with electronic ignition
  • 12 V operating voltage for electronic control and for the burner
  • Washable water filter
  • Run dry protection on the water and fuel tank
  • Automatical stop system after 30 minutes of inactivity
  • Automatic pre-glowing
  • 200 l built-in water tank (only for "T" "TG" and "S" version)
  • Pressure reduction up to 10 bar with sealed gun
  • Stepless pressure and flow regulation via speed engine governor (manually (standard) or electronically ("+" version))
  • Digital control and reporting on display of :
    • motor functions
    • flame monitoring
    • water level (*)
    • fuel level (*)
  • Automatic speed regulation, idling after 30s (*)
  • Track & Trace system (*), including information on
    • Working hours burner & machine
    • Errors visible from a distance
    • Location of the machine
    • Location history
    • Error messages history
  • Note: (*) = only at "+"-version

PRODUCT CODES


DiBO JMB-S 200/18 T

PRODUCT CODE

1.128.355 - JMB-S 200/18 S

OPERATING PRESURE (bar)

200 bar

WATER THROUGHPUT (l/h)

1080 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

12,5 kW (diesel)

MOTOR RATING (kW)

110 kW

FUEL TANK CAPACITY (L)

53L

FLOAT TANK CAPACITY (L)

200L

DIMENTIONS (mm)

1927 x 1198 x 1095mm

WEIGHT (kg)

630 kg

NOZZLE

055

DiBO JMB-S+ 200/18 T

PRODUCT CODE:

1.128.356 - JMB-S+ 200/18 S

OPERATING PRESURE (bar):

200 bar

WATER THROUGHPUT (l/h):

1080 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RETING (kW)

12,5 kW (diesel)

MOTOR RATING (kW)

110 kW

FUEL TANK CAPACITY (L)

53L

FLOAT TANK CAPACITY (L)

200L

DIMENTIONS (mm)

1927 x 1198 x 1095mm

WEIGHT (kg)

630 kg

NOZZLE

055

DiBO JMB-S 250/15 T

PRODUCT CODE

1.128.505 - JMB-S 250/15 S

OPERATING PRESURE (bar)

250 bar

WATER THROUGHPUT (l/h)

900 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

12,5 kW (diesel)

MOTOR RATING (kW)

110 kW

FUEL TANK CAPACITY (L)

53L

FLOAT TANK CAPACITY (L)

200L

DIMENTIONS (mm)

1927 x 1198 x 1095mm

WEIGHT (kg)

630 kg

NOZZLE

090

DiBO JMB-S+ 200/15 T

PRODUCT CODE

1.128.506 - JMB-S+ 200/15 S

OPERATING PRESURE (bar)

250 bar

WATER THROUGHPUT (l/h)

900 l/h

MAXIMUM WATER TEMP (°C)

30 - 120°C

BURNER BOILER RATING (kW)

12,5 kW (diesel)

MOTOR RATING (kW)

110 kW

FUEL TANK CAPACITY (L)

53L

FLOAT TANK CAPACITY (L)

200L

DIMENTIONS (mm)

1927 x 1198 x 1095mm

WEIGHT (kg)

630 kg

NOZZLE

090


VIDEOS

CONTACT US

Get in touch

More information on this model or to book a demo.